Breeding rabbits in the private sector is quite common. The meat of this animal is considered dietary, they are divorced quickly enough and do not require a special diet. All this together allows their breeding for a family with any income. People living in city apartments, too, do not lag behind – they plant decorative breeds as a pet. However, for any animal a “house” is needed, in which it will be comfortable. Today we will talk about making such a design as a cage for rabbits with your own hands (step-by-step instructions with photo examples will help you figure out how to build it).
Cage for rabbits with their own hands: photo examples, types of designs
Only at first glance it seems that all cells are the same. In fact, there are differences between them. They may differ in height (1, 2 or 3 tiers), eared age (for adults or young). For different breeds, the cells differ in size (dwarf, regular, giants). Also, designs may differ depending on the orientation of rats, which can be decorative or productive. We suggest to get acquainted with examples of similar constructions in the photo.
DIY homemade rabbits cages:
Bunk cages for rabbits for small areas:
Other wooden cages for rabbits:
How to build a cage for a decorative rabbit with your own hands: drawing up a drawing, an action algorithm
In order to build a cage for a decorative rabbit, you will need to perform a preliminary drawing. It can be made by hand on a regular piece of paper or you can use any computer program for 3D modeling. How about the scheme will look like, you can see in the photo.
Drawings of rabbit cages that can be used to build a house:
Useful information! When designing, it is worthwhile to think of a dwelling for an ornamental rabbit so that it can move freely without staying in one place. When installing a cell in a confined space, it is better to make it in two tiers with the possibility of transition from one to another.
After drawing up the drawing, you can proceed to the assembly, for which you will need to have on hand:
- plywood or chipboard;
- plastic or linoleum;
- frame bars;
- construction stapler or small studs with a hammer;
- screws, screwdriver.
To begin with, plywood (chipboard) is sheathed with plastic or linoleum, which is attached with a stapler, studs. After that the framework gathers, interfloor overlappings are established. Lastly, the frame is sheathed with a grid.
Important! If the cell is in 2 floors, then two doors are made: one at the bottom from the end, the second from the top, in the form of a hatch. So it will be easier to get a rabbit and transplanted to another place at the time of harvesting.
Examples of cells for a decorative rabbit in the photo
Having considered the examples of ready-made houses it will be easier to understand how to make a cage for a rabbit of a decorative breed.
Examples of finished cages for decorative breeds of rabbits:
How to make a two-tier rabbit cage with your own hands: the nuances
If a person is not engaged in such work for the first time, then, as such, he no longer needs a drawing – all that is required is “stored” in the head. However, novice home masters better to sketch a schematic representation of the future house for eared pets.
Rabbit size cell drawings: examples
In order for the Dear reader not to reinvent the wheel, we suggest to get acquainted with examples of schematic images of various types of such cells.
Drawings of various cell types for rabbits for hand-made production:
Two- or three-tiered rabbit cage with your own hands: a step-by-step instruction with photo examples
Having understood how to draw a drawing, you can proceed directly to the construction. The editors of Homius.ru will tell in detail how to make cages for rabbits, backing up text information with photo examples.
How to make a cage for rabbits with your own hands: installation of the frame and the bottom of one of the tiers
So, consider the sequence of works:
We sheathe the frame and set the tiers in place
And now we proceed to the frame trimming and further installation of the cell tiers:
As you can see, you just need to attach your hands – in the construction of self-made cages for rabbits there is nothing super-complex.
Mounting cages for rabbits from the grid: what is required
In fact, everything is pretty simple here. With the help of grinders or ticks for cutting the wire, we cut the walls of the required dimensions, which are subsequently sewn together with aluminum or copper wire. The door will be more logical to do with the end of the design. Also used listogib. When using it, the long walls, floor and ceiling of the cage will be made of a solid mesh and sewn only in one edge.
Useful information! Such houses for eared do not differ in strength due to the lack of a frame. They are not recommended to have in several tiers. Therefore, if you need a good housing for animals, it is better to use the frame option.
Making your own rabbit cage by the method of Mikhailov
Quite an interesting design that helps to awaken the instincts of rabbits, which contributes to the rapid growth of the population in one single house. Let’s try to figure out how to build a similar cage for rabbits.
Drawing up drawings and diagrams for the cell according to the Mikhailov method
It makes no sense to pore over the drawings yourself, especially if there is no definite experience in such works. It is much more convenient to find them on the Internet. The editors of Homius.ru have already done this for the convenience of our dear reader. They can be found in the pictures below.
Cell drawings for rabbits according to the Mikhailov method:
The work performed during the assembly of the stand and the rest of the rabbit cage
Carefully read the drawings and photos of the finished houses – this will help to do all the work correctly. The mine, located in the middle of the cage, will serve to remove animal feces, therefore it should be upholstered from the inside out with frost-resistant linoleum or bikrost. Experts do not advise using ruberoid; its rough surface will collect dirt, which is very difficult to clean. The dimensions of the cage for rabbits, built with their own hands, are chosen individually; there are no standards for the area of houses.
Special attention should be paid to the area of walking and nesting. Compartments for walking rabbits are equipped with drinkers and feeders. It is better to make the floor of the rails (by analogy with step-by-step instructions). The nesting compartment (matochka) is equipped with a small entrance (like a burrow), from which a small tunnel goes, going down 9 cm. This creates similarity with the natural habitat and contributes to the awakening of the instincts of rabbits, including the breeding instinct. The mother liquor is thoroughly insulated. If the winters in the region are severe enough, the nesting compartment is allowed to be heated, which contributes to the breeding of rabbits even during the cold season.
Drinkers and feeders are made automatic. How they look can be seen in the pictures.
Automatic type feeders and drinkers do not require constant monitoring:
The upper third tier is most often made jigging – they place little matured rabbits in it, capable of living without a mother. It is also equipped with drinkers and feeders. The roof is made shed, through it vent pipe, which is necessary for additional ventilation compartments.
Useful information! Such designs greatly facilitate the work of the farmer. With proper installation, the owner is required to take care of no more than half an hour per week.
Buying cages for rabbits: which is better to give preference
If there is no time for self-fabrication of the cage or there is no desire to do this, you can purchase a finished structure. Its shape will depend on the goals pursued by the owner. Provided that the rabbits are kept “for the soul”, it makes sense to purchase a simple frame house. If the plans are breeding eared with subsequent profit, you should give preference to cells, constructed according to the method of Mikhailov or Zolotukhin. Such houses will allow you to get a large litter in a short time.
A farmer who breeds rabbits cannot do without good cages for keeping them. Of course, it is easier to purchase such structures, but you can’t call them a little value. So, making a rabbit house with your own hands will be much more profitable. In any case, the editors of Homius.ru expressed their opinions, and then decide the owner. The main thing is to understand that, qualitatively and according to the rules, a rabbit cage will contribute to the rapid reproduction and weight gain by eared pets. Although some farmers claim that for their normal maintenance there is a hole dug up by an excavator and covered with plexiglas or plywood from above. It is possible that it is, but only for one particular breed. The bulk of the rabbits need more comfortable conditions of detention.
Only well-built rabbit cages will achieve similar results.