How to build a simple practical cage for rabbits drawings, photos, videos. Wooden and metal cages for rabbits drawings.
For keeping rabbits in personal subsidiary farming requires cages, you can make them yourself from scrap materials. In this article we will look at some of the most popular rabbit cage designs.
When designing cells, you must first take into account the minimum size of the cell floor area for each individual.
Minimum rabbit cage size:
- For the rabbit – 0.5 – 0.7 m².
- For male producers – 0.5 m².
- For young stock – 0.15 m².
For the maintenance of rabbits will need to make a few cages, separate single cages for bunnies and males, and multi-breed for young.
Cage designs for rabbits.
Before you start building a cell, you need to make detailed drawings and decide on the size of future cells. Cells can be made single or multi-row.
For adult rabbits, it is more practical to make a two-section cage with a length of 1500 mm, a width of 700 mm, and a height of 500 mm.
For young stock will need multi-roomy cages.
Drawing of making cages for the rabbit.
The skeleton of the cells is made of bars, the side and rear walls of the cells are made of boards or plywood and made closed, this will protect the animals from drafts.
The front of the cells is made of metal mesh with a small cell.
The floor of the cells is made of wooden slats 3 cm wide, packed parallel to each other, you can use a welded metal grid of 1.5 x 5 cm. Below the cage, you can install a metal pan to collect manure.
The roof of the cells is made of plywood or planks; if the cell stands on the street, it must also be covered with slate or roofing material, it is not recommended to cover the roof with a professional flooring, it will heat up under the sun and it will be hot in the cells.
Cells should be installed at such a distance from the floor that it was convenient to maintain them.
The cages for females need to be equipped with a nest for the future brood of baby rabbits, the nest can be made of plywood in the form of a box 400 mm x 400 mm, 300 mm high.
In the box you need to make a hole Laz, with a diameter of 200 mm. The manhole should be located at a height of 100 mm from the floor so that the rabbits initially would not fall out of the nest. The floor in the box must be solid.
Cage for rabbits video.