Cages For Rabbits With Their Own Hands. Step-By-Step Instruction

Cages For Rabbits With Their Own Hands. Step-By-Step Instruction

Rabbit cage simple design

Due to the simplicity of the design, such a cage can be done with minimal experience with carpentry tools. For its manufacture will need wooden slats and bars, plywood, metal mesh, shingles and plexiglass. Despite the fact that this type of cell is not particularly difficult, it looks beautiful and interesting, that all members of your family will appreciate.

Putting the cage frame for rabbits

To facilitate the process of feeding animals, the cage is set at an elevation, constructing additional stand. Height is selected in such a way that both adults and children can take care of animals. To have food and hay at hand, and not to look for additional space for food storage, the frame is equipped with a spacious shelf.

Cages For Rabbits With Their Own Hands. Step-By-Step Instruction

Cages for rabbits drawings

For the supporting posts of the cage, a wooden bar with a cross section of at least 60 × 60 mm and a height of 850 mm will be needed.

Cages For Rabbits With Their Own Hands. Step-By-Step Instruction

Cages For Rabbits With Their Own Hands. Step-By-Step Instruction

Cage for rabbits do it yourself step by step instructions. A photo

When cutting wood do not forget handle rake edges. This will avoid splinters and improve the aesthetics of the cage design for rabbits.

The base frame and the shelf support are fixed to the main posts. For this, four screws are screwed on the upper part of the frame and at a distance of 372 mm from the floor. It is important to correctly mark up and follow the geometry of the structure, using the joiner’s square and level. It should be a smooth, stable construction without distortions and curved corners.

Cages For Rabbits With Their Own Hands. Step-By-Step Instruction

Cages For Rabbits With Their Own Hands. Step-By-Step Instruction

To make a cage with an additional compartment, a neatly shaped notch is made in the front board of the upper frame. The cut-out part is fixed to the old place with the help of a piano loop. A narrow folding part will provide access to the inside of the cell in the future.

Cages For Rabbits With Their Own Hands. Step-By-Step Instruction

From the inside of the upper and lower frame as spacers mounted additional slats. They eliminate the precariousness of the structure and serve as a support for the flooring, and therefore require a particularly careful fit.

Cages For Rabbits With Their Own Hands. Step-By-Step Instruction

Cage for rabbits do it yourself step by step instructions. A photo

Cages For Rabbits With Their Own Hands. Step-By-Step Instruction

Cages For Rabbits With Their Own Hands. Step-By-Step Instruction

Cages For Rabbits With Their Own Hands. Step-By-Step Instruction

In the corners of wooden boards or boards used as a shelf and base of the cage, a cutout is made for the supporting legs. The shields are installed in their places, after which they consider the work at this stage completed.

Assembling the main compartment

The rabbit cage should please the owner not only with its strength and reliability, but also with an attractive appearance. The step-by-step instruction will help you to collect the cage for rabbits from the front, and step-by-step instructions will help to understand in detail all the nuances of working with your hands

Cages For Rabbits With Their Own Hands. Step-By-Step Instruction

Cages for rabbits drawings

The first stage is collected box under the door. To do this, from the rails using furniture dowels and screws assemble a rectangular frame. Saw a groove for the vertical movement of the door. Make the frame of the movable partition size slightly larger than the height of the box. From the outer surface, install the dowels, after which the door is installed in place, placing the dowels in the prepared slots on the side posts.

Cages For Rabbits With Their Own Hands. Step-By-Step Instruction

From the wooden slats mounted compartments on both sides of the opening. Assemble the back of the structure, as well as the side walls.

How to make a cage for rabbits. A photo

Eight rails from which the rafters of the roof will be made are cut at an acute angle. The rafters are assembled by fastening pairwise pointed elements, after which they are finally fixed with self-tapping screws. After that, the brackets are removed and the rafters are fixed to the base of the roof.

Cages For Rabbits With Their Own Hands. Step-By-Step Instruction

Cages For Rabbits With Their Own Hands. Step-By-Step Instruction

Cages For Rabbits With Their Own Hands. Step-By-Step Instruction

Cages For Rabbits With Their Own Hands. Step-By-Step Instruction

Triangular elements are cut out of the plywood sheet, which block access from the doorway to the roof. They are fastened with screws to the central rafters in accordance with the attached scheme.

Cages For Rabbits With Their Own Hands. Step-By-Step Instruction

Cages For Rabbits With Their Own Hands. Step-By-Step Instruction

Cage for rabbits do it yourself step by step instructions. A photo

Sheathed roof plywood sheets, cutting them out according to the drawing. The rear ramp is made with a cut-out mounted on the piano loop. The hinged part of the roof will facilitate access to the inner space of the cage. In order to join the central part of the frontal slope of the roof with side elements, small sections are cut in its corners.

Read more:  A Simple Option, How To Make A Cage For Rabbits

Cages For Rabbits With Their Own Hands. Step-By-Step Instruction

After the assembly of the base of the cage for rabbits will be finished, the construction is treated with linseed oil, dried, and then painted with one or two layers of oil paint. Despite the longer drying period, it will reliably protect the wood from moisture.

How to sheathe the walls and roof

Cages For Rabbits With Their Own Hands. Step-By-Step Instruction

Cages for rabbits drawings

The inner side of all walls, as well as the door of the cage for rabbits, is sheathed with their hands with the help of a screwdriver, self-tapping screws and a metal mesh with a cell size of not more than 25 × 25 mm.

Cages For Rabbits With Their Own Hands. Step-By-Step Instruction

First, the ends of the cage are sewn up, and then the front wall is mounted above the doorway.

Cages For Rabbits With Their Own Hands. Step-By-Step Instruction

To make the design convenient to transport, from the sides of the frame supporting frame fasten folding arms.

Cages For Rabbits With Their Own Hands. Step-By-Step Instruction

On the front board of the upper support frame set gate valve for fixing the narrow reclining part.

Cages For Rabbits With Their Own Hands. Step-By-Step Instruction

The latch is also installed on the cage door.

Cages For Rabbits With Their Own Hands. Step-By-Step Instruction

To decorate the design can be a figure of a rabbit, cut out of plywood. It is painted, and then glued or fastened with screws on the front wall of the roof.

Cages For Rabbits With Their Own Hands. Step-By-Step Instruction

Cages For Rabbits With Their Own Hands. Step-By-Step Instruction

Protect the piano loop, which provides the mobility of the folding part of the roof, you can use a universal adhesive tape. Pasted over metal, it will prevent rust and ensure reliable operation of the part.

Cages For Rabbits With Their Own Hands. Step-By-Step Instruction

Using a stapler and metal staples ranging in size from 8 mm to the roof lining of the rabbit house is attached shingles.

Cages For Rabbits With Their Own Hands. Step-By-Step Instruction

Cage for rabbits do it yourself step by step instructions. A photo

Cages For Rabbits With Their Own Hands. Step-By-Step Instruction

Using a special glue for a soft roof, from a long, narrow piece of bituminous canvas equip roof ridge.

Cages For Rabbits With Their Own Hands. Step-By-Step Instruction

Cut out plexiglass the size of one of the side walls, then in the upper part of the mount bolt. If necessary, this element will be able to protect animals from drafts and rain. Plexiglas is installed on the frame, securing it in the lower part with furniture dowels, and at the top – fixing the bolt of the bolt in the pre-drilled hole.

Cages For Rabbits With Their Own Hands. Step-By-Step Instruction

Cages For Rabbits With Their Own Hands. Step-By-Step Instruction

For animals collect small ladders and inner house. After impregnation with linseed oil, the details are stained and placed inside the cell.

Cages For Rabbits With Their Own Hands. Step-By-Step Instruction

Cages For Rabbits With Their Own Hands. Step-By-Step Instruction

Cages For Rabbits With Their Own Hands. Step-By-Step Instruction

After the paint is completely dry, the cage is transferred to a permanent place, provisions are prepared and the rabbits are settled in their new home.

Cages For Rabbits With Their Own Hands. Step-By-Step Instruction

Cages For Rabbits With Their Own Hands. Step-By-Step Instruction

Cages For Rabbits With Their Own Hands. Step-By-Step Instruction

Cages For Rabbits With Their Own Hands. Step-By-Step Instruction

Cages For Rabbits With Their Own Hands. Step-By-Step Instruction

Cages For Rabbits With Their Own Hands. Step-By-Step Instruction

Cages For Rabbits With Their Own Hands. Step-By-Step Instruction

Rabbit Cage Construction Tips

Despite the fact that rabbits do not belong to animals that are particularly demanding to the content, it is better to rely on the opinion of experienced people in making and placing the cage.

The main criterion for choosing a place for the installation of rabbitry is the lack drafts. In addition, in the summer, animals are better off in the shade, so you have to equip the shed or place the cages in the shed.

Do not forget that when breeding rabbits you will have to relocate the young, separately to keep pregnant females and males, etc., so do not get one cage. It is better that there is always a free room at hand, and the cages themselves should have padlocks.

Cages For Rabbits With Their Own Hands. Step-By-Step Instruction

Listen to the advice of experienced rabbit breeders, and you don’t have to correct your own mistakes and miscalculations.

Floor rabbitry is best done from the grid or slats, laid at a distance of 1.5 cm from each other. When operating cells outdoors, they also equip the lower, reclining tier of the floor of the boards.

The roof The cells installed in the room are made of the same material as the walls. Outside, rabbitry is covered with waterproof roofing material. Tin for this is better not to use.

On the street houses for animals have on supports height from 0.5 to 1 m. Best of all, if inside the cage there will be also a house with a notch in the form of a “hole”.

Cells divide on several branches, providing a hole for animals from one part to another, as well as hinged lids for cleaning individual "rooms".

The rabbit’s dimensions, in which it is planned to keep the males, make it sufficient for their free range. We must remember that males who lead a sedentary lifestyle may become infertile.

Cages For Rabbits With Their Own Hands. Step-By-Step Instruction

For every 3-4 females do separate spacious cage.

Baby rabbits contain in the same room with a nursing rabbit. At the same time, they keep one cage free next to it, setting aside the mother with the smallest animals for additional feeding.

Read more:  How To Keep Rabbits Cellular And Free Breeding

The best material for the rabbitry is wood – boards, slats, plywood, glued panels. They make the power frame and the roof. Depending on the climate and installation site, cell walls are made of mesh, plywood, battens or boards. In the process of work, special attention is paid to the finishing of materials so that animals could not be injured by splinters, sharp parts of the net or protruding edges of nails and screws.

Rabbit cage sizes

The dimensions of the cells for breeding rabbits vary widely depending on the size of the animals, the breed, the purpose of the cage (for males, females with children, baby rabbits, etc.).

For nursing rabbits cell sizes should be at least 1.70 – 1.85 m in length, 1 m in width and 0.6 – 0.7 from the floor to the lid. Cells are placed at a distance of 0.7 – 0.8 m from the ground on the trestle or supports. Animals weighing from 5 kg require rabbit fins with a length of 1.3–1.5 m and a width of up to 0.7 m. The height of the back wall should be 0.4–0.45 m, and the front wall should be 10–15 cm higher.

Youngsters Rabbits are deposited in group rabbit rats where they contain from 8 to 20 individuals. In individual cells from 3 to 5 pups that are not 3 months old are resettled. Older animals place no more than 2 – 3 animals per cage. In this case, one individual must account for at least 0.5 square meters. square meters, and the rabbit’s height should be more than 35 cm. In group cages one rabbit must have at least 0.2 square meters. m, which must be considered in the manufacture of rabbit and placing animals.

Cages For Rabbits With Their Own Hands. Step-By-Step Instruction

The size of the cage for rabbits. A photo

An adult individual needs to be placed with a minimum size of 1 × 0.6 m and a height of 0.6 m; however, it is better to increase these dimensions by 20–30%.

Cells are placed in one or two tiers (the so-called shed). Depending on the size of the animals, the width of the shed is made no more than 2 m, and the depth is up to 1 m, setting the cages at a height of about half a meter.

For okrol use double rabbit with a queen cell – a removable feed compartment for keeping animals up to 1 month. The cage compartments are divided by a wooden partition with a 17×20 cm hole.

The main thing that animals in captivity feel comfortable, so it is recommended to follow all the tips on their placement and maintenance.

Rabbit cage designs

With a portable bunk rabbit type, rabbit care and feeding is easier. It is enough from time to time to rearrange the construction to a place with thick grass – and the animals are provided with food and a clean place for walking.

Cages For Rabbits With Their Own Hands. Step-By-Step Instruction

Photo cages for decorative rabbits

The wooden structure, on the roof of which there is a low box with a moisture-proof bottom, will allow growing seedlings or greens on the roof of the rabbit. This solution is not only highly practical, but also looks spectacular on the site.

Cages For Rabbits With Their Own Hands. Step-By-Step Instruction

Rabbit cage. A photo

The “two-room” pet house with a common feeding room makes it easier to care for animals and allows you to increase the space intended for their walking.

Cages For Rabbits With Their Own Hands. Step-By-Step Instruction

Large cage for rabbits. A photo

The cage designs for rabbits, in which animals have access to walking on the ground, are beneficial not only from the standpoint of keeping animals, but also from the economic side. With a sufficiently large cell volume, its manufacture does not require large material costs.

Cages For Rabbits With Their Own Hands. Step-By-Step Instruction

Triangular cell-hut with a free-range pen is easy to make. On the day, such a structure is placed in place with thick grass, and at night the cage is removed to a stationary elevation.

Cages For Rabbits With Their Own Hands. Step-By-Step Instruction

The spacious rabbitry, designed for two places, has a presentable appearance due to its spacious construction, flexible roofing and painting in bright colors. Black metal elements of door hinges and latches complete the picture.

Cages For Rabbits With Their Own Hands. Step-By-Step Instruction

A large summer house for breeding rabbits can hold up to ten individuals. The high door of the structure allows you to enter inside for feeding, cleaning and inspection of animals.

Cages For Rabbits With Their Own Hands. Step-By-Step Instruction

The cell of increased depth, divided into two rooms, allows you to contain several individuals in each half. Enlarged courtyard gives comfort during walking and feeding animals. Contrast staining and copper fittings cells adds to her grace and presentability.

Cages For Rabbits With Their Own Hands. Step-By-Step Instruction

Cage for decorative rabbits. A photo

Rabbit cages, set at a height, are often performed in the same enclosure with an aviary. A common roof saves material during the construction of the cage for rabbits and provides a comfortable and spacious animal housing.

Cages For Rabbits With Their Own Hands. Step-By-Step Instruction

Read more:  Rabbit Cages For Zolotukhinu Quickly And Easily

The rectangular rabbit type with a single-sided roof is very easy to manufacture and provides all the comforts for animals and their care. A simple rabbit cage can be made from wooden bars and slats, boards and wooden lining, and the roof can be covered with slate or soft roofing.

Cages For Rabbits With Their Own Hands. Step-By-Step Instruction

Do-it-yourself Zolotukhin’s cells

Cages of a design of the Russian rabbit breeder Zolotukhina gained immense popularity due to its simplicity, low cost and ease of care for animals.

The advantages of this type of cells include:

  • sloping slate or plywood floor with a grid near the rear wall;
  • three-tier structure of six cells. Shifting the cells to the width of the mesh in the floor allows for easier cleaning;
  • the possibility of arranging the queen cell in a regular cell;
  • feeder special design that does not require opening the door during the distribution of food;
  • low cost.

Improvements made by an experienced ration rabbit breeder bring the content of rabbits closer to the conditions in which they are in their natural habitat.

Design features

For the manufacture of rabbit cages Zolotukhina can use wooden boards and slats, slate sheets, tin, polycarbonate panels, metal mesh.

The framework of the building and the partitions are made of wood, and the floor and roof are made of flat slate. Grid upholstered door and a small part of the floor at the rear wall. The wooden elements of the structure are sheathed with tin, so that the rabbits do not gnaw them.

Rabbit cage size:

  • cage width – 2000 mm;
  • height of a three-tier structure – 1500 mm;
  • depth – from 700 to 800 mm;
  • doors – 400 × 400 mm;
  • floor grid width – 150-200 mm;
  • the difference in the level of the front and rear parts of the floor is from 50 to 70 mm.

Cages For Rabbits With Their Own Hands. Step-By-Step Instruction

Drawings of Zolotukhin’s cells. A photo

Each of the three levels consists of two cells divided by two board partitions between which hay is stored. The floor, which is also the roof for the lower tier, is made of slate. The back of the floor to a width of 200 mm is made of mesh. Each upper cell extends by the same amount relative to the lower one so that the feces are removed to the floor or ground. The back wall is made of polycarbonate and set in an oblique way.

The exact dimensions for the manufacture of cages are not needed; the scheme given by the breeder is sufficient. This structure is a structure with a queen cell, so for the usual keeping of rabbits the wall with the opening will need to be replaced with a solid wooden shield.

The door of the queen cell is not made from the net, since the nest needs darkening and shelter from drafts. So that the young growth does not fall out during harvesting or feeding, a board 10 centimeters wide is nailed in front of the shelter.

The design with a fenced-off queen cell makes it easy to expand the space for growing rabbits. To do this, it is enough to remove the plank partition.

In winter, Zolotukhin sets in a cage mother hole. It is a wooden box with an increased height of the rear wall. This allows you to create the necessary expansion in the depths of the rabbit "hole". The opening of the liquor is cut in such a way that there is no threshold between the box and the floor of the cell.

Sizes of the winter queen cell of Zolotukhin for rabbits:

  • the upper and lower parts – from 300 × 300 to 400 × 400 mm;
  • front wall – 160 mm;
  • rear wall – 260 mm;
  • opening height – 150 mm.

The feeder is a long tray that occupies 2/3 of the length of the cage. Its front wall is doubled compared to the back wall, and the bottom has a bias inside the cell at an angle of up to 35? The trough is mounted on a rod hinge, which allows you to install the tray in the door. This eliminates the need to open the cage when feeding and makes it easier to clean the feeder from food residues.

Cages for rabbits with their own hands. Video

As you can see, making a cage for rabbits with your own hands is quite simple. It is important to ensure the convenience and safety of pets, as well as provide ease of feeding and cleaning.