Options For Self-Manufacturing Cells For Rabbits

Street cages for rabbits are significantly different from home structures. Making such cells with your own hands can significantly save money and make rabbit cages as convenient as possible.

Options For Self-Manufacturing Cells For Rabbits

Street cages for rabbits are significantly different from home structures

General requirements for rabbit cages

Despite the huge choice of various cell constructions, all of them must comply with the general requirements that ensure not only the highest productivity of farm animals, but also the minimum incidence and The highest livestock safety indicators:

  • in the intracellular space should not linger the waste products of animals, including feces and urine;
  • the interior should have maximum protection against the entry of rats and other rodents;
  • Adequate natural or artificial lighting and ventilation are required.
  • cell cleaning and maintenance of animals should be convenient;
  • rabbitry must be completely safe for newborns, young animals and productive animals.

Rabbits of the main herd are most often contained in sheds with placement in single-tier or in two-tier cages, and in rabbitries it is advisable to install single-tier cages. Independently build rabbit trays of a closed type should be based on the size of the room allocated for keeping animals.

How to make a cage for rabbits from the grid (video)

Rabbit cage types

There are several variations of designs that are currently being actively used for keeping rabbits, but sheds, as well as Mikhailov’s cells and Zolotukhin’s designs, have gained the greatest popularity among rabbit breeders. Depending on the conditions of detention, they may be:

  • outdoor or outdoor, stationary type structures, insulated, located on flat and dry, as well as protected from sunlight and wind gusts;
  • external lightweight mobile structures that are easy to move, helped by reliable and durable metal wheels on one side of the cage;
  • stationary structures for use in special rooms, represented by barns or pavilions, protected from temperature extremes and negative external factors.

Depending on the containing livestock, the rabbitks are intended for different purposes:

  • collective content of young individuals, previously divided by weight and size, as well as the degree of development and age;
  • individual content of males and individuals-producers, actively used in breeding;
  • mother liquor, which contained females and offspring.

The last option assumes the presence in the rabbitry nest compartment. To understand what specific houses are needed for the rabbits, you should be familiar with the correct definition of the size of the rabbitry being made.

How to make a cage for rabbits with your own hands

As a rule, standard metal grids are used for manufacturing, which are convenient in operation and maintenance. It is desirable to veneer wooden exterior parts with sheet metal, which will prevent the natural processes of wood decay and damage to the elements with the sharp teeth of rabbits. Inside the use of solid metal is undesirable as such material can be very hot and cool, and also have a negative impact on animal health.

Read more:  How To Disinfect Rabbit Cells

Determining Rabbit Sizes

The rabbit sizes optimal for keeping farm animals directly depend on their intended purpose.

  • single-section models with a length of 80-110 cm and a width of 60 cm, for one head at the rate of 0.5-0.7 m2 of area per individual;
  • two-section models with a length of 130 cm and a width of 60 cm, for one head at the rate of 0.78 m2 of area per individual;
  • single-section models with a length of 80-110 cm and a width of 60 cm, for one head at the rate of 0.5-0.7 m2 of area per individual;
  • for the main herd of the model with a nesting compartment 60 cm long and 40 cm wide, for one head at the rate of 0.24 m2 of area per individual;
  • for ten heads of young stock, group sheds 170 cm long and 60 cm wide, for one head at the rate of 0.10 m2 of area per individual;
  • for young stock, group sheds 170 cm long and 60 cm wide, for one head on the basis of 0.17-0.23 m2 of area per one individual;
  • with multi-row placement of the main herd of cage with a length of 80-120 cm and a width of 40-60 cm, for one head at a rate of 0.5-0.6 m2 of area per individual;
  • with multi-row placement of young cages with a length of 80-120 cm and a width of 40-60 cm, for one head per 0.1 m2 of area per individual.
Options For Self-Manufacturing Cells For Rabbits

It is undesirable to use solid metal inside the cage.

Particular attention is paid to the main dimensions of the cell, represented by a long, wide, high front and rear walls, as well as the total surface area of ​​the floor in square meters. For keeping large breed rabbits, constructions with a length of 150 cm, a width of 70 cm, a front wall height of 75-90 cm and a back 45-55 cm, and a floor area of ​​105 cm2 are recommended. For the maintenance of rabbits of medium breeds, constructions with a length of 100-120 cm, a width of 60 cm, a height of the front wall 60-80 cm and a back 45 cm, and a floor area of ​​65-75 m2 are recommended.

Rabbit cell diagrams and drawings

In order to divide the cell into a couple of sections, a partition is cut. The roof on the scheme can be a folding type which greatly facilitates the care of farm animals. Cells placed in outdoor conditions should be manufactured on legs from bars, whose height is 0.7-0.8 m, which is reflected in the drawings carried out in advance. As a rule, ready-made drawings are used.

How to make a drawing of a cage for rabbits (video)

Selection and preparation of materials

The most common way of keeping domestic rabbits is the cellular variant. For self-manufacturing rabbit dwell, it is advisable to use the most affordable, fairly cheap building materials, represented by boards, metal mesh with medium cells, plywood moisture-resistant sheets or flat slate. A wooden frame is made of a frame, as well as a construction door and a solid partition.

Read more:  Cell Disinfection Is The Key To The Health Of Rabbits - Everything About Poultry

Most often, plywood or sheet slate is used for arranging the floor surface, and it is advisable to use a metal mesh for self-fabricating the feeding partition and the outer door. Metal sheets allow you to close all the protruding parts of wood from animals, which can be gnawed by rabbits. It should be noted that any detail in the cellular structure must be completely safe and completely smooth. Mesh elements should not have sharp ends, and all wooden parts should be carefully polished, which will prevent the appearance of animal splinters and other injuries.

Options For Self-Manufacturing Cells For Rabbits

Special attention is paid to the main dimensions of the cage, represented by a long, wide, high front and rear wall, as well as the total surface area of ​​the floor in square meters

Stages of manufacturing rabbit

For independent production of rabbitry, it is necessary to purchase 12-14 wooden bars with a cross section of 50 × 50 mm and a length of 400 cm, as well as twenty wooden bars with a length of 200-250 cm. approximately 15 m of galvanized steel stacks of welded type 100 cm wide with cells of 20 × 20 mm. Waterproofing is done with ruberoid.

The design is represented by the supporting frame, floor, walls, ceiling and doors. Technology of serial self-assembly of rabbitry:

  • installation and temporary tightening of vertical wooden bars;
  • manufacturing and fixing on vertical guides of profiled bars;
  • laying and fixing on the boards of edged boards;
  • trimming and laying on boards of solid sheets of waterproofing in the form of roofing material;
  • with indentation of 10-15 cm from the resulting drain gutters, a pair of horizontal wooden bars are nailed along the entire length;
  • on the installed horizontal bars along the entire length, a mesh strip with dimensions of 0.5 × 4.0 m is packed;
  • lateral parts of the fabricated cage are sewn with sheet plywood or chipboard panels.

The metal mesh is cut to size with the use of wire cutters. On the outside, all cells are necessarily sheathed with cut hewn houses, and the opposite end from the entrance is sheathed to prevent drafts.

Options For Self-Manufacturing Cells For Rabbits

You can easily and quickly perform the convenient rabbitry rabbit easily using the most simple and accessible materials.

How to build a rabbit from improvised means

You can easily and conveniently perform rabbitry rabbit easily and quickly using the most simple and accessible materials. Having a standard set of simple plumbing tools, as well as having sufficient skills to handle such a tool, it is possible to make a cage from old wooden window frames and wooden slats, residual particle boards, plastic films and other simple construction waste. hands volume rabbitry. A method of manufacturing a cellular construction standard:

  • production from wooden bars with a section of 50х50 mm or old window wooden frames of the frame base;
  • installation on the floor surface in the area allocated for feeding animals, standard metal mesh with cells of medium or small size;
  • installation of improvised wooden materials, which are most often used wooden boards, sheet plywood or chipboard, rear wall and a solid floor inside the nest compartment;
  • facing the plywood of the side walls of the rabbit, and the subsequent installation of the partition, in which you first need to cut a quarter-meter hole located between the rear part of the cage and the nesting compartment;
  • installation on the socket section of the special cover;
  • fixing on a frame base, in the middle part of the cage, the support bar, which will divide the structure into separate sections;
  • installation inside the cell space of drinkers and feeders, which may be ready, factory made, or made independently;
  • flipping the resulting construction and finishing fixation of the mesh floor by means of ordinary wooden slats;
  • installation of feed bins and net outlets or rods to give coarse-type forage to animals;
  • installation on a fabricated roof cage, equipped with a convenient handle, and installation of doors with gate valves.
Read more:  Cages For Rabbits Do It Yourself

In any case, the completed cells should comply with the basic requirements, which are represented by standard sanitary standards of space, mandatory rack or net floors, queen cell for suckle individuals, auto drinkers and feeding troughs of any type. The design should be comfortable and available for regular cleaning activities, equipped with a drain system in the presence of the second cell tier.

Making a simple cage for decorative rabbit do it yourself

Decorative rabbits – small in size and relatively unpretentious in the care of pets. The cage for such a animal can be done independently. As a rule, for the maintenance of decorative rodents are compact in size, portable design. Important to remember, that the dimensions of the design are determined by the size of the ornamental rabbit. Indicators need to increase at least four times, but the animal feels best in a fairly spacious dwelling. The height of the structure, as a rule, corresponds to the height of the animal, standing on the hind legs. Original look multilevel designs.

Cage for rabbits do it yourself (video)

Cages for decorative rabbits are most often made of traditional materials, represented by sheet plywood for the floor and a metal grill for the manufacture of the base. In the pre-prepared drawings, a place for the installation of the drinker, the feeder and the shelter house is required. If it is intended to manufacture a two-story cage, then in the ceiling it is necessary to pre-cut a hole sufficient in size for convenient movement of the rabbit to the upper tier. Important to remember, that the finished structure cannot be treated with chemical impregnations and varnishes, as well as coated with toxic paint.