The cages for fattening the rabbits will be needed by the farmer after jigging the rabbits from the female. In them the young will be up to slaughter. During the construction of rabbit houses should take into account the size, since several individuals are adjacent to each other in the same cage. The main requirements for such structures – the safety of pets and ease of maintenance.
Rabbit cells for fattening
Features of cells for fattening
Rabbits are in the same area with the mother until they reach one month of age. Some drop off young stock after 45 days. During this period, babies already eat adult food and become independent.
After the end of lactation, the rabbits are provided with a separate housing – feedlots. They contain babies of the same sex of 4–8 individuals. Up to 3 months you can keep together and different sex pets, but after they still have to sit down.
During puberty, males and females cannot be kept together, otherwise they will mate. Adult males will also have to be seated in single cells. Mature males fight for territory and can cripple and even kill each other. Young females are quite capable of getting along if they are taken from one litter or are kept in the same cage from an early age.
Feeding houses are the place where young growth lives until puberty or slaughter. Their features:
- The area, which is allotted to 1 individual, does not exceed 0.25 m2. In spacious cages, pets move a lot, which negatively affects the quality of meat.
- The owner of the animals should be comfortable to care for them – distribute food and do the cleaning.
- Inside the cells is placed a feeder for animal feed and nursery for hay, and also equip the dwelling with a drinking trough.
Attention! Each juvenile drinks about 200 ml of water per day. The drinking bowl should meet the needs of all pets living in the house.
Sizes of feeding houses
Before starting the production of cells, it is necessary to determine their parameters. It is considered normal if an area of at least 0.12 m2 is allocated to one rabbit. Based on this, and calculate the size of the cells. Thus, for 6–8 pets, a construction with a length of 1.2 m and a width of 0.7 m is suitable. The height should be half a meter or a little more.
The construction of the cage for fattening rabbits
When the time comes to settle the males, you need to take care of a separate dwelling for each of them. Bulk cells in this case will not be needed. It is enough to build a structure of 35×40 cm with a height of 50 cm. A square cage of 50×50 cm will suit the rabbit in a pair.
Preparation for construction
So, the dimensions of the house are determined. Now you need to choose the material for construction. Farmers prefer to make fattening cells from plywood or mesh. Some use the materials at hand – the remnants of chipboard, old furniture. It is better to make the floor mesh so that pet excrement falls down into the pan, which is usually made of galvanized sheet or plastic. Then the inside will always be clean.
Attention! For the construction of cells is better to use a galvanized grid, which is not susceptible to corrosion.
Preparation for construction includes the creation of a drawing. Having decided on the size, you need to transfer the plan of houses for fattening on paper. The diagram indicates all measurements.
Materials and tools
For the construction of feed houses for rabbits will need the following materials:
- grid with small cells;
- slats made of wood with a section of 20×40 mm;
- self-tapping screws;
- tin sheet for pallet;
- hinges for the door and latch.
Such a list of materials is used if it is decided to make rabbit houses out of a grid on a wooden frame. However, the walls of the structure can be made of plywood or other material, at the request of the farmer.
Tools and materials for cell construction
From the tools you need a standard set:
- cutting pliers;
- to work with wood need a saw;
Detailed instructions for the manufacture of cells for fattening
First you need to build a frame for future construction. To do this, cut the bars of the desired length. They are connected to each other along the perimeter with the help of screws. Then install the vertical supports, which are attached to the base at a right angle. The door is placed on the front of the house. We’ll have to make a frame of the bar of the appropriate size.
Attention! It is important to consider that the cells usually rise above the ground to a comfortable height from 50 to 80 cm.
The next step is cutting the grid into the necessary fragments, according to the drawing. The finished rectangles are attached to the wooden frame with rivets. After finishing trim, hinges are attached, they fix the door on them. At the bottom of the cage under the mesh floor install the pallet, cutting it out of tin or galvanized sheet. The outer edges are folded inward.
It is not necessary to make the floor mesh. Many farmers make it from wood. To do this, narrow slats are stuffed onto the frame, leaving a distance of 1-1.5 cm between them. On such a floor, the pets feel comfortable, their paws are not injured, and the stools fall into the pan through the slots.
Attention! If the cages for the young are standing outside, you will need a roof. It is made under the slope. A suitable roofing material is slate.
Inside the finished design put the feeder. It is attached to one of the walls of the house to avoid tipping. The cage is equipped with a manger for hay and a drinker of a suitable volume. It is convenient to use the nipple, as in it the water always remains clean. The container is fixed on the outside of the house, and the nipple is turned inside.
Cages for fattening rabbits make it easy. The main thing is to decide on the size, given the number of pets, and then draw a drawing. During the construction process it is important to adhere to the scheme. Rabbit house can not be painted, as harmful compounds can adversely affect the health of pets.